Click on photo for larger
image |
MT14 & MT19 REPLACEMENT
BRAKE SHAFTS - Many cars have brake shafts that
have been damaged because of making contact with a loose drive chain.
Be sure and check yours, as a brake shaft failure can have very serious
results. If you've got wear, order a new one.
44221/98361 |
M9, M 19, MT19
BRAKE SHAFT |
75.00 |
M-16718 |
MT14
BRAKE SHAFT |
75.00 |
69084 |
36" GAUGE BRAKE ROD |
75.00 |
F-1222 |
WOODRUFF KEY, BRAKE ROD |
1.00 |
|
|
BRAKE
ROD BEARING -
These bearings are used to support/attach
the above brake rod to the car frame. All come with installed grease zerk.
46525 |
BRAKE
ROD BEARING - M9,
M19, MT19 |
15.00 |
M16724A |
BRAKE
ROD BEARING - M14,
MT14 |
15.00 |
F-2702-12 |
N.O.S. 12 THREAD JAMB NUT, FOR TOGGLE ARM |
1.00 |
F-2702-13 |
JAMB NUT - 13 THREAD FOR OUR TOGGLE ARMS |
1.00 |
M-28351-13 |
EYE BOLT FOR OUR TOGGLE ARM ASSEMBLY |
24.00 |
F-7106-13 |
YOKE BOLT FOR OUR TOGGLE ARM ASSEMBLY |
24.00 |
|
|
BRAKE
PARTS - M9, M14, MT14, M19, MT19
BRAKE PARTS M-9, M-14, MT-14, M-19, MT-19, AND CERTAIN A-CARS Illustrated left to right
M17082 |
BRAKE
SHOE HANGER - M9, M19, MT19 (far left object) |
13.00 |
M16736 |
BRAKE
SHOE HANGER - M14, MT14 (far left object) |
13.00 |
M18457 |
BRAKE
PIVOT STUD M9, M19, MT19 (second from left) |
13.00 |
M16730 |
BRAKE
PIVOT STUD
- M14, MT14 (second from left) |
13.00 |
M32739 |
BRAKE
PIVOT STUD (FLANGE BRAKES)
(second from left) |
13.00 |
M18930 |
BRAKE
HANGER PIN |
6.50 |
M18456 |
BRAKE
LINK |
4.00 |
M18931 |
SPRING
- BRAKE SHOE |
1.50 |
M-18926 |
A CAR HANGER SPRING |
2.00 |
M-18925 |
A CAR BRAKE HANGER PIN |
8.50 |
|
|
BRAKE
LINK PIN - For M9/M14/MT14/M19/MT19 & S2 cars
M-9 PART M-29207, SMALLER PIN
|
|
BRAKE
TOGGLE ARM ASSEMBLY - Available for M9/M14/MT14/M19/MT19
& S2 cars
M29209 |
M-9 BRAKE TOGGLE ARM ASSEMBLY WITH EYEBOLT |
45.00 |
M-29214 |
M-9 BRAKE TOGGLE ARM ASSEMBLY WITH YOKE
|
45.00 |
M-29230 |
M/MT-19, M/MT-14 & S-2 BRAKE TOGGLE ARM ASSEMBLY WITH EYEBOLT |
45.00 |
M-29229 |
M/MT-19, M/MT-14 & S-2 BRAKE TOGGLE ARM ASSEMBLY WITH YOKE |
45.00 |
|
|
BRAKE
SHAFT END ARM
- Available for M9/M14/MT14/M19/MT19 cars
- One arm is used on each end of the brake shaft.
M29206 |
M-9 BRAKE SHAFT END ARM |
25.00 |
M-30124 |
M/MT-19 BRAKE SHAFT END ARM
|
25.00 |
M-28356 |
M/MT-14 BRAKE SHAFT END ARM |
25.00 |
|
|
SET
SCREW - Used on Axle Thrust Collar and Brake
Arm.
M10268 or M22500 Small
(top photo) used on M9, M19, MT19 Axle Thrust collar also on M14, MT14
Brake Arm
M18663 - Large (bottom
photo) used on M14, MT14, S2 Axle Thrust collar
|
Click on photo for
different view |
BRAKE
SWITCH MOUNTING BRACKET FOR M19 & MT19 CARS
- This bracket can be mounted on the engine box side panel to position the
brake light swith so that the activating arm contacts the brake lever. Click
on the photo to see a typical installation.
BRAKE
SWITCH MOUNTING BRAKET |
7.50 |
|
Click on photo for
larger image
(Note
- postage stamp illustrated for size reference)
|
RELEASE
SPRING - BRAKE
- Available for M9/M14/MT14/M19/MT19 cars. Pulls the brake lever back
to the release position.
SPRING
ANCHOR - BRAKE LEVER
- Attaches the spring to the brake lever
M7298 |
RELEASE SPRING - BRAKE |
3.50 |
56235-19 |
SPRING
ANCHOR - BRAKE LEVER |
3.50 |
56235-14 |
SPRING
ANCHOR - BRAKE LEVER |
3.50 |
|